Corrugated galvanised steel (colloquially corrugated iron or pailing, commonlyabbreviated CGI) is a building material composed of sheets of hot-dip galvanised mild steel, cold-rolled to produce a linear corrugated pattern in them. The corrugations increase the bending strength of the sheet in the direction perpendicular to the corrugations, but not parallel to them. Normally each sheet is manufactured longer in its strong direction.
CGI is lightweight and easily transported. It was and still is widely used especially in rural and military buildings such as sheds and water tanks. Its unique properties were used in the development of countries like Australia from the 1840s, and it is still helping developing countries today.
Specifications
Hot Galvanized Corruguated Sheet
STandard: JISG3302/ASTMA653
Thickness: 0.12--6.0mm
Zinc coating: 30-275g
Material: SGCH, SPCC, SGCC, DX51D
WIDTH: 600MM-1000MM
Raw material: 762mm to 665mm( after corrugated ) and 9 waves
Raw material: 914mm to 800mm (after corrugated) and 11waves
Raw material: 1000mm to 900mm (after corrugated) and 12 to waves
We also can produces as customers' requirement
| Capacity |
about 20000 tons per month for the steel sheet and coil product |
| Grade |
SGCC, DX51D, Q195, all according to the customer's request |
| Standard |
SPCC,SGCC,SGCD FULL HARD,Q195, all according to the customer's request |
| Thickness |
0.12mm - 6.0mm, all available |
| Width |
600mm - 1250mm , all available |
| Length |
we can adjust the length according to your request |
| Elongation |
Min. 7% |
| Zinc coating weight |
30-275gm/m2, double side |
| Spangle |
regular spangle, minimized spangle and zero spangle |
| Edge |
mill edge, cut edge |
| MOQ |
1 containner |
Audited Supplier 
){kind=link}
){kind=link}